ATC 8110

CPU

Intel® Coffee-Lake S/Refresh Core™/Xeon® i7/i5/i3/Pentium®/Celeron® processor (LGA1151)

PCH

Intel® chipset C246

Memory

Two 204-pin DDR4 SO-DMIM sockets

Up to 32GB+32GB in size, 2400/2666 MHz

Storage

3 x 2.5” SATA 3.0 SSD/HDD (15mm height) or 2 x 2.5” SATA 3.0 SSD/HDD+ 1 x u.2 NVMe SSD

1 x CFast (externally accessible)

Expansion

1 x Full size mPCIe socket (PCIe 2.0 + USB 2.0)

1 x Full size mPCIe socket (USB 2.0 + PCM signal)

1 x Key-B 3042/3052 M.2 socket (USB 3.0 + PCM signal) for LTE/5G NR modem

2 x Key-M 2280 M.2 socket (PCIe 3.0 x2) for NVMe (optional GE74 card installed)

1 x PCIe 3.0 x16 slot for discrete graphics card, up to 321mm in length

2 x PCIe 3.0 x4 slot, up to 190mm in length

Discrete Graphics Card (option)

Up to NVIDIA® RTX 2080Ti, 250W or more advanced in the future

GPS and Sensor

1 x Default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou

Optional modules with dead reckoning available

Built-in G-sensor

Ethernet

2-Port independent GbE LAN, RJ45

9K byte jumbo frame

PTP (IEEE 1588) support

Controller: Intel® I210-IT, PHY: Intel® I219LM

vPro (iAMT) & WOL support

Additional 4/8-port independent GbE/PoE PCIe card for option

Security

TPM 2.0: Infineon SLB9660TT1.2-FW4.40 (option)

I/O Ports, Front-Plate

5-Pin terminal block for 9~36VDC-IN

ATX power button

Reset button

5 x LED indicators for power/IGN/WLAN/WWAN/status

5 x LED indicators for storage/fan control

5 x LED indicators for user to program

1 x USB 3.1 + 1 x USB 2.0, type A

1 x DB15 ((DI/DO + CAN 2.0B + DR signal))

1 x DB15, reserved for expansion

6 x SMA antenna holes

2 x DB9 (RS232/RS422/RS485 selectable)

I/O Ports, Rear-Plate

4 x USB 3.1, type A

2 x GbE (RJ45)

1x VGA + 1 x HDMI

2x DB9 (RS232/RS422/RS485 selectable)12V/2A output

2 x SIM slots

1 x Antenna for GPS

1 x PCIe x16 lane slot

2 x PCIe x4 lane slots

Display

1 x VGA port, up to 2560 x 1600@60Hz

1 x HDMI v1.4, up to 4096 x 2304@24Hz

DI/DO (isolation)

4-bit input
- Source: 9~36V-IN (12V@1.1mA/24V@2.2mA)
- External: 0~33VDC pull-high, high-level, 3.3 - 33 VDC; low-level, 0 - 2 VDC4-bit output
- Source: 9~36V-IN (nominal 35mA@24V):
- External: 5~27VDC pull-high, sink current w/ 220mA for each bit, 500mA max (@25C)

Source or external can be selected by software (default: source type)

Audio

Line-out (green-color): unbalance stereo, left & right channel

MIC-in (pink-color)

CAN 2.0B (isolation)

CAN 2.0B (isolation)

Controller: SJA1000

Bit rate up to 1Mbit/s

Socket CAN supported

11-bit & 29-bit identifiers, ISO 11898- 1, ISO 11898-2

ESD: ± 8KV/15KV (contact/air)

2.5KV isolated

In-Vehicle Power Management

Dual 9~36VDC-IN (each for 12V/30A in max.)

Cranking voltage: 6V~9V (< 30 seconds)

Reverse protection, OCP & UVP

Ignition on/off control/programmable on/off delay timer

Extra 12V@2A for DC-out

Dimensions & Weight

ATC 8110 (fanless): 191.2 x 176 x 350 (W x D x H) (mm)

ATC 8110-F (fan-kit installed): 207.4 x 176 x 350 (W x D x H) (mm)

ATC 8110/ATC 8110-F: 8KG/8.2KG (w/ o graphics/PCIe card)

Environment

Operating temperatures (ATC 8110 & ATC 8110-F)
- -30°C~60°C (fanless design w/ 35W TDP CPU, 60°C for industrial SSD, 45°C for hard drive)

Storage temperatures: -40°C~85°C

Relative humidity: 10%~95% (non-condensing)

Vibration (random)

IEC 60068-2-64
- 1.0g@5~500Hz (in operating, HDD), 1.6g for HDD w/ damping brackets
- 2.0g@5~500Hz (in operating, SSD + graphics card)

MIL-STD-810G (SSD + graphics card)
- Operating: MIL-STD-810G, 514.6C, Procedure 3, Category 4

Shock (SSD + graphics card)
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g

Certifications

CE approval, FCC Class A, E13